To enter the maintenance mode and allow UAV association please proceed as follow :
- Initial state : UAV, battery not connected
Note : Press firmly the buttons and pay particular attention from step 3 to keep both buttons pressed.
- connect the battery : the POWER led will go to a fixed red status
- press the check button (and keep it pressed)
- press the power button for at least 4 seconds, the POWER led will got to a blinking green state (you can now release the power button)
- keep the check button pressed until the 4 leds are in a blinking green state
You are now in maintenance mode and a Wifi network UX11XYZXYZ_M will appear.
Please contact Delair Support via portal if you still have troubles to enter maintenance mode.